SUPPLIES & TOOLS:
- Siser® Easyweed HTV, Bright Red
- Siser® Easyweed HTV, Orange
- Siser® Easyweed HTV, Yellow
- Siser® Easyweed HTV, Green
- Siser® Easyweed HTV, Pale Blue
- Siser® Easyweed HTV, Lilac
- Siser® Easyweed HTV, Black
- Siser® Weeder
- Silhouette Caemo® 4
- 9" x 9" Cricut EasyPress&trade or Iron & Ironing Board
- 24 pkg 10" x 15" Wilton® Candy Melt Parchment Sheets OR Other Cover Sheet
- 9" Fiskars® Razor Edge Fabric Scissors
DIRECTIONS:
- Place EasyWeed Black on the cutting mat with the carrier side facing down, load mat into desktop cutter, mirror design, cut material, and remove from cutting mat. Repeat with remaining colors of EasyWeed.
- Use scissors to cut the design from each HTV material to save any unused vinyl. Use your Siser Weeder tool to remove excess material from your design.
- Turn on EasyPress and set temperature to 335F. Pre-press tote for a few seconds to remove any wrinkles or moisture.
- Place EasyWeed Black down first on the tote as desired. Cover with parchment paper, tack (press for 1-3 seconds) using the EasyPress, and peel carrier hot.
- Repeat tacks and peels on the remaining EasyWeed colors one at a time until all 6 colors are applied.
- Cover entire design with parchment paper and press one last time for 10 seconds.
JOANN HACKS:
- All time, temperature, and pressure settings for heat applying Siser HTV can be found at SiserNA.com. An additional 30F has been added to our recommended settings in these instructions anytime a Cricut EasyPress is used.