SUPPLIES & TOOLS:
- Silicone bracelet molds
- Resin & resin hardener
- Silicone pouring cups
- Popsicle stick/stir stick and toothpick
- Plastic gloves
- Opaque dye
- Beads
- Feathers
- Pressed flowers
DIRECTIONS:
- Start by pouring equal parts resin and resin hardener into a silicone pouring cup. Wear plastic gloves to avoid getting resin on skin. Use a popsicle stick to stir the mixture together thoroughly for at least 3-5 minutes. Let the resin sit for several minutes before immediately pouring so the bubbles rise to the top.
- Place small objects such as beads, feathers, or pressed flowers in the silicone bracelet mold, making sure the objects are below the top edge of the mold. For the opaque dyes, pour the resin first, then add several drops of the dye to the resin. Use a toothpick to swirl the dye through the resin.
- Pour the resin into the bracelet mold very slowly to avoid the formation of bubbles. Allow the resin to settle below the objects and then continue to pour, making sure to avoid the resin overflowing the mold. If the resin does overflow, use a popsicle stick to scrape the excess resin off of the top of the mold.
- Once mold is filled, allow to dry for at least 30-40 hours before removing the bracelet from the mold.