Resin Holiday Layered Coaster Set

SUPPLIES & TOOLS:

• Color Pour Resin & Resin Hardener
• Color Pour Resin modern coaster molds
• Color Pour Resin holiday opaque dye
• Color Pour Resin winter opaque dye
• Color Pour Resin holiday glitter
• Color Pour Resin crystal flakes neutral
• Color Pour Resin UV glitter
• Color Pour Resin holiday clay confetti
• Color Pour Resin supply kit
• Color Pour Resin heat gun

DIRECTIONS:

Red, Green & Gold Geometric Coaster:

1. Wearing gloves from the Supply Kit, mix equal parts resin and hardener according to package instructions.
2. Add gold glitter to resin and mix slowly. Pour into the mold. Apply heat with the Heat Gun to disperse any bubbles. Allow to cure 12-24 hours until hard. Remove from mold.
3. Mix another batch of equal parts resin and hardener according to package instructions.
4. Divide prepared resin into four plastic cups from the Supply Kit. Add drops of red dye and red foil flakes into 1 cup. Add gold dye to a 2nd cup. Add gold crystal flakes into a 3rd cup. Add green glitter into the 4th cup. Mix slowly to incorporate the dyes and glitters into the resin.
5. Pour each mixture into the geometric sections of the gold glitter coaster that is already cured (you don’t need the mold for this step). Apply heat with the Heat Gun to disperse any bubbles.
6. Allow to cure 12-24 hours until hard.

Red & White Coaster:

1. Wearing gloves from the Supply Kit, mix equal parts resin and hardener according to package instructions.
2. Add white dye and UV glitter flakes to resin and mix slowly. Pour into the mold. Apply heat with the Heat Gun to disperse any bubbles. Allow to cure 12-24 hours until hard. Remove from mold.
3. Mix another batch of equal parts resin and hardener according to package instructions.
4. Divide prepared resin into two plastic cups from the Supply Kit. Add red glitter into 1 cup. Add red and white clay confetti into 2nd cup. Mix slowly to incorporate the mix-ins to the resin.
5. Pour each mixture into the geometric sections of the white glitter coaster that is already cured (you don’t need the mold for this step). Apply heat with the Heat Gun to disperse any bubbles.
6. Allow to cure 12-24 hours until hard.