Reversible Animal Print Mask

SUPPLIES & TOOLS:

• 100% cotton fabric for mask: 1/4yd Rose print, 1/4yd Animal print
• 3yds or 1 pkg wide black bias tape, 1 1/4"
• Pattern template (download PDF under print description)
• Basic sewing supplies

DIRECTIONS:

1. Download the pattern by clicking “download PDF" Print Description.
2. Cut out patterns using cutting directions.
3. Seam allowance is 1/4" unless stated otherwise.
4. Cut two Rose print (flowers growing up). Place pieces right sides together and sew the outer curve. Repeat with Animal print pieces.
5. Open both mask halves and press both seam allowances to the right.
6. Topstitch down the seam allowance, about 1/8" from the seam.
7. Match front and back pieces wrong sides together, nesting center front seams.
8. Baste layers of mask together using 1/8" seam allowance around the edge of the mask.
9. Apply bias tape to the both sides of the mask. Trim bias tape to be even with the rest of the mask.
10. Cut two 40" pieces of bias tape for the top and bottom ties. Center the bias tape and pin across the top edge of the mask folding over the edges.
11. Topstitch along the edge of the bias.
12. Center the other tie along the bottom of the mask and sew.
13. Finish ties by folding twice and tacking into place or knotting ends.

 

Please read and follow all manufacturers' instructions for all tools and materials used. Provide adult supervision if children participate in this project. Masks are not intended for hospital or medical use and are not OSHA certified. Please follow CDC guidelines for use of masks.