Ruffle Coasters
Item #
052511022P06
SUPPLIES & TOOLS:
- Fat Quarter Printed Cotton
- Insul-Bright Insulated Lining: 4"x 4" piece
- Thread (to match)
- Sewing Machine
- Basic Sewing Supplies
- Scissors
- Needles
- Straight Pins
- Iron & Ironing Surface
- Pattern Template A
- Diagram 1
DIRECTIONS:
To print the template and diagram, click on the "GET PATTERNS" tab above.- Cut two of Template A from the printed cotton, and one of Template A from the Insul-Bright insulated lining.
- Cut two 2 1/2"x 16" strips from the printed cotton.
- Connect the two strips of fabric together like quilt binding by lining up the ends of both strips of fabric, right sides together, and rotating one by 90 degrees.
- Sew a diagonal seam.
- See Diagram 1.
- Trim the excess fabric leaving a 1/4" seam allowance.
- Press seam open.
- Repeat with the opposite ends of the strips to create a continuous circle of fabric.
- Fold in half, matching the raw edges and press.
- Sew a gather stitch 1/4" in from the raw edges all the way around, but do not overlap the starting point.
- Set aside.
- Baste one printed cotton circle (Template A) to the Insul-Bright circle.
- Use plenty of pins to hold the pieces together and prevent either from shifting.
- Be sure to baste the circle as precisely as possible.
- This will help maintain a perfect circle in the completed coaster.
- Press flat.
- Gather the ruffle to fit the circumference of the circle, making sure ruffles are evenly spaced.
- Pin the ruffle to the cotton side of circle, matching the raw edges and using plenty of pins.
- Baste the ruffle to the circle with ruffle side down.
- Follow the first line of basting stitches that hold the cotton to the Insul-Bright.
- Pin the remaining cotton circle to the ruffle side of the coaster, right sides together.
- Sew around the circle along the previous stitch lines, leaving a small opening to turn right side out.
- Turn right side out.
- Gently press, being careful not to crush the ruffles or misshape the circle.
- Hand stitch the opening closed.
- Top stitch 1/4" in from the ruffle seam all around the circle.
- Pull tail threads to back and knot.