SUPPLIES & TOOLS:
- 1 yd Fabric
- Basic Sewing Supplies
- 12"x18" Pillow Form
DIRECTIONS:
To print the guide, click on the "GET PATTERNS" tab above.NOTE: These instructions are for one pillowcase to fit a 12"x18" pillow form. Adjust measurements if using a different size.
Sew 1/2" seam allowance.
- Cut one rectangle, 18" x 24", for front of pillowcase.
- Cut two rectangles, 18" x 14", for back panels.
- For back panels, fold under 1/2" along the long side and press.
- Fold again and stitch for hem.
- With right sides together, pin the back panels to the front, overlapping the back panels to fit front.
- Using the scallop guide, outline the scallops on front panel.
- Leave a 1/4" gap between the top peaks of the scallop and the outside edge of the fabric.
- Stitch along the scallop outline. Trim off excess fabric along the scallops.
- Turn right side out, pushing out the scallops, and press.
- Measure from the top of a scallop arch down 2 1/2" and mark the outline for the 12" x 18" pillow.
- Stitch around on this line.
- Insert pillow form.