SUPPLIES & TOOLS:
- 10x10 Shadow Box Frame
- Cutting Machine
- Adhesive Vinyl
- Acrylic Paint
- Paint Brush
- Drill/Drill Bit
- Utility Knife
- Clamps
- Scrapbook Paper
- Paper Cutter
- Masking Tape
- Sandpaper/Nail File
- Adhesive
DIRECTIONS:
- Right click to save the art as an SVG file to your device.
- Start by taking the frame apart and removing the glass.
- Mark on the top with a marker where you want to make the slot.
- Cover the mark with masking tape, this will help your drill bit from sliding.
- Clamp the inner frame piece to the outer, you are going to drill through both.
- Make small holes across your marked line for the slot.
- Use the utility knife to cut out the remaining pieces from the slot.
- Use the sandpaper or nail file to smooth out the slot.
- Paint the frame.
- Line the back of the frame with scrapbook paper.
- Cut the SVG file out of vinyl using a cutting machine.
- Place the image on the glass from the frame.
- Assemble the frame back together.
JOANN HACKS:
- Two coats of paint are suggested for the frame.
Rated 3 out of
5
by
CraftinGal from
SVG link gives error message
@joann can you fix the link to the SVG file and resend the email?
Date published: 2022-05-23
Rated 3 out of
5
by
LinC from
SVG file
Link to SVG file comes up with an ERROR. Can not download file.
Date published: 2022-05-23