S’Mores Bar and Gift Box

S'more Bar
_x000D_ SUPPLIES & TOOLS:_x000D_

_x000D_
• Cricut® Cutting Machine
_x000D_
• Cricut StandardGrip Mat 12"x 12"
_x000D_
• Cricut basic tool set
_x000D_
• Cricut white removable vinyl
_x000D_
• Wood frames/signs
_x000D_
• Black paint
_x000D_

_x000D_
_x000D_ DIRECTIONS:_x000D_

_x000D_
1. This project makes a multiple s'mores signs. We recommend measuring your signs prior to make sure this size will work. You can customize your project size by clicking customize button in the bottom right of the project screen. Hit Make It to make the project as is.
   _x000D_ PREP
_x000D_
_x000D_
2. Paint inside of the frame with black paint. Let dry completely.
_x000D_
3. CUT
_x000D_
_x000D_
4. Add the white vinyl your mat. Check gridlines down on the mat.
_x000D_
5. Select vinyl for your cut setting.
_x000D_
6. Load into the machine.
_x000D_
7. Press Flashing Cricut button to start cut.
_x000D_
8. ASSEMBLE
_x000D_
_x000D_
9. Remove the unneeded pieces using a Weeder tool. It is usually easiest to move from the inside out when weeding.
_x000D_
10. Use Transfer Tape and your Scraper Tool to apply the vinyl cuts to your project. Make sure surfaces you plan to adhere to are clean and dry.
_x000D_
11. Peel back transfer tape, leaving the vinyl behind.
_x000D_

_x000D_
_x000D_
_x000D_ S’mores Gift Box
_x000D_ SUPPLIES & TOOLS:_x000D_ _x000D_

_x000D_
• Cricut Maker
_x000D_
• Cricut StandardGrip Mat 12”X12”
_x000D_
• Cricur Scoring Wheel
_x000D_
• Cricut Basic Tool Set
_x000D_
• Cricut Premium Vinyl, Black
_x000D_
• Cricut Foil Acetate, metallic Sampler
_x000D_
• Transfer Tape
_x000D_
• Acetate gift boxes
_x000D_
• Kraft Paper
_x000D_
• Pen
_x000D_
• String
_x000D_
• Printer
_x000D_
• Small plastic food bags
_x000D_
• S’mores Supplies
_x000D_
• Glue for acetate
_x000D_

_x000D_ DIRECTIONS:
_x000D_
_x000D_ To download pattern click here.
_x000D_
_x000D_ This project makes a vinyl design that for a box that is 2.7” X 2.7” and the tag is 3”X1.5”. We recommend measuring your boxes to ensure the design will fit. You can customize the words by clicking customize button in the bottom right of the project screen. Hit Make It to make the project as is.
_x000D_ CUT_x000D_

_x000D_
1. Mat 1- Follow directions for print then cut with your kraft paper and printer. Then cut out the tag._x000D_
   _x000D_
   1. Print then Cut Instructions
   _x000D_
   _x000D_
_x000D_
2. Mat 2 – Add acetate on the mat, add your scoring wheel to the machine. Then when prompted add fine point blade to cut out.
_x000D_
3. Selecte acetate cut setting
_x000D_
4. Cut and score your mat
_x000D_
5. Mat 3- Add the black vinyl to your mat, gridlines down
_x000D_
6. Select vinyl for your cut setting.
_x000D_
7. Cut the vinyl and unload.
_x000D_

_x000D_ Assemble_x000D_ _x000D_

_x000D_
1. Remove the unneeded pieces from the vinyl using a Weeder tool. It is usually easiest to move from the inside out when weeding.
_x000D_
2. Use Transfer Tape and your Scraper Tool to apply the bracken vinyl cuts to the acetate. You will do this before assembling the box. Make sure surfaces you plan to adhere to are clean and dry. 
_x000D_
3. TIP: If you have never used vinyl before, check out the links below in the More Help section.
_x000D_
4. Peel back transfer tape, leaving the vinyl behind.
_x000D_
5. Assemble the box with glue.
_x000D_
6. Add bag around smores supplies
_x000D_
7. Personalize tag with name
_x000D_
8. Add twine and tag to bag
_x000D_
9. Place bag in box.
_x000D_

_x000D_