SUPPLIES & TOOLS:
- 1/4 yd Lame' Metallic Fabric, Blue, Red, Gold
- Fabric Glue
- Assorted Sequins, Blue, Gold, Red
- Child's Mask
- Sewing Machine
- Sticky Velcro Tabs 1" Squares
- Hot Glue Gun & Glue Gun Sticks
- Optional: 3- D Paint, Red
- Optional: 3- D Paint, Blue
- Scissors
DIRECTIONS:
MASK:- Smear the front of the child's mask with fabric glue and press the blue metallic fabric onto the mask. Let it dry and trim off any excess fabric.
- You will cut out wavy "eyebrows" out of the gold metallic fabric and apply with the fabric glue above the eye holes on the mask.
- To make these two pieces of the gold fabric match hold two pieces of fabric insides together when you cut them out.
- Glue them in place and them make smaller "eyebrows' with a serrate top edge. Cut them out the same way that you cut out the gold pieces.
- Glue them on top of the gold eyebrows.
- Cut two matching wings to be glued onto the back of the mask at the highest point of the eyebrows. They should be about 1 1/2" at the base and make a crease at the base when you glue them onto the mask. These are easiest to attach with a hot glue gun to make the crease stay in place as you glue them onto the mask.
WRISTBANDS:
- Cut four pieces of the red metallic fabric 3 1/2" tall by the width of your child's wrist plus 2". Sew two pieces together, leaving a side open, making a total of two bands using four pieces of fabric. Turn them right side out and top stitch the bands. Folding in the open-ended side as you top stitch.
- Cut out lightning bolts on the gold metallic fabric and glue onto the middle of the wristbands.
- Glue the assorted sequins around the lightning bolts.
- Attach the Velcro squares to the back of the wristbands to hide them.
JOANN HACKS:
-
You can also use 3-D red of blue paint to add details to the mask or the wristbands.