SUPPLIES & TOOLS:_x000D_
_x000D_ DIRECTIONS:_x000D_
- _x000D_
- Adhesive foil matte, rose gold _x000D_
- Vinyl, ivory _x000D_
- StandardGrip machine mat _x000D_
- Transfer tape _x000D_
- Weeder _x000D_
- Scraper _x000D_
- Framed glass _x000D_
_x000D_ DIRECTIONS:_x000D_
- _x000D_
- Go to this project on Cricut Design Space to make this- _x000D_
- Design Space Link
_x000D_ SIZE: Image is approximately 10"x 11.5" (25.4 cm x 29.2 cm)
_x000D_
_x000D_ PREPARATION:_x000D_- _x000D_
- If you want to alter the project, select Customize, then use the tools in the Edit panel to make changes before you cut. _x000D_
_x000D_ CUT:_x000D_- _x000D_
- Follow the prompts in Design Space to cut images from the vinyl and adhesive foil. _x000D_
_x000D_ ASSEMBLE:_x000D_- _x000D_
- Remove the unneeded pieces of vinyl using a Weeder Tool. It is usually easiest to move from the inside out when weeding. _x000D_
- Use Transfer Tape and your Scraper Tool to apply the vinyl cuts to your project. Make sure surfaces you plan to adhere to are clean and dry. _x000D_
- TIP: If you have never used vinyl before, check out the links below in the More Help section. _x000D_
- Apply vinyl in the same order it appears in the Layers panel in Design Space, starting from the bottom layer and working up. _x000D_
- Use a dry erase marker to write your three weekly goals above each of the arrows. _x000D_
_x000D_ CRAFT HACK TIPS & TRICKS:
_x000D_ Matte Adhesive Foil Application
_x000D_ Transfer Tape Usage Instructions
_x000D_ Vinyl Application
_x000D_ Cutting & Applying Vinyl _x000D_