Wine All I Want Wine Bag

SUPPLIES & TOOLS:

• Cricut Cutting Machine Air™ 2 or Cricut Maker™
• Cricut LightGrip mat
• Cricut Infusible Ink™ transfer sheet Rainbow Cosmic Dots
• Cricut 6"x 7" EasyPress™
• Cricut EasyPress Mat
• Cricut Infusible Ink wine bag
• Cricut Heat-resistant tape
• Lint roller
• Tweezers

DIRECTIONS:

1. Go to this project on Cricut Design Space to make this-
2. https://ds4.cricut.com/#/design/223839252


3. This project makes one 2.4"x 9" wine bag design. You can customize your project size & monogram by clicking customize button in the bottom right of the project screen. Hit "Make It" to make the project as is.


4. Helpful Instructions here:
   
5. Cut & Weed
6. Note: Before handling InfusibleInk™ materials, be sure that your hands are dry and free of any oils or lotions.


7. Place InfusibleInk™ transfer sheet onto StandardGrip mat, liner side down.
8. In Design Space, select and size your design to fit on apparel blank. Be sure to Mirror your design.


9. Select "Browse all materials", then InfusibleInk™ transfer sheet. If using a Cricut Explore Air™ machine, turn Smart Set Dial to "Custom" first.
10. Load mat and blade into machine, then press flashing "Go" button.
11. Remove cut design from mat and trim away unused area of sheet.   
12. Gently roll cut design so cut lines separate and are more visible. “Cracking" the cut this way makes it easier to remove excess paper from in and around your design.


13. Use your fingers or tweezers to carefully remove negative pieces from in and around your design, leaving design on liner.
14. Trim clear liner so it does not extend beyond Cricut EasyPress heat plate. 


15. Apply
16. Tip: Now is a good time to prep your Cricut EasyPress™. For precise temp, time, and pressure settings, always refer to the 
    
17. For this project, set Cricut EasyPress 2 to 400°F (205°C) and 240 seconds. For original Cricut EasyPress settings, refer to 
    
18. EasyPress 2 
19. Preheat 15s 
20. 385°F/195°C   60 seconds 
21. Light pressure 
22. Warm peel 


23. EasyPress 1 
24. Preheat 15s 
25. 360°F/185°C   120 seconds 
26. Light pressure 
27. Warm peel 



Stacking order top to bottom:

28. Cricut EasyPress™ 1 or 2 
29. Butcher paper 
30. InfusibleInk™ design, facedown 
31. Cricut wine bag blank 
32. White cardstock (80 lb/216 gsm) or 4 layers butcher paper
33. Cricut EasyPress mat 


34. Other supplies needed: 
35. Lint roller



Preheat Preparation: 

36. Preheat Cricut EasyPress™ 1 or 2  
37. Place wine bag on clean mat 
38. Insert cardstock inside wine bag to prevent bleed through.
39. Lint roll wine bag.
40. Cover wine bag with butcher paper larger than heat plate.
41. Preheat wine bag for 15 seconds.
42. Remove butcher paper from top of wine bag.



Application: 

43. Place design facedown, liner side up.
44. Cover with clean butcher paper larger than heat plate.
45. Press with light pressure at 385°F for 60 seconds (EasyPress 2) or 360°F for 120 seconds (EasyPress 1)  
46. Slowly lift press.
47. Remove butcher paper.
48. Remove liner when cool to touch.