SUPPLIES & TOOLS:
- Chipboard
- Everyday Iron-On, Black
- Everyday Iron-On, Gold
- StrongGrip Machine Mat, 12"x 12"
- Knife Blade + Housing
- Transfer Tape
- Weeder
- Scraper
- Cricut EasyPress Mini
- Cricut EasyPress Mat
- Masking Tape
- Acrylic Paint, Ivory
- Keychain Hardware
- Cricut Machine
DIRECTIONS:
SIZE: Finished charms are 1 1/2"x 1/2"
PREPARATION:
- To alter the project, use the Mat Preview screen to arrange pieces. Ensure pieces are within an 11 in x 11 in area, oriented to the top left corner of mat.
- For best results, open chipboard and leave it out for 24 hours to acclimate. If chipboard warps, place under a heavy object.
- For the iron-on layers, be sure to mirror your design.
- Place iron-on material, shiny side (clear liner) down, on mat.
- Follow Design Space prompts to cut images.
CUT:
- Use masking tape or painter's tape to secure chipboard edges to mat.
- Follow Design Space prompts. Confirm correct cut setting and insert Knife Blade.
- Ensure chipboard has cut all the way through before removing. Perform another pass if needed.
- Use a Weeder Tool to remove unneeded iron-on pieces, leaving design on clear liner.
ASSEMBLE:
- Paint your chipboard charms.
- Apply iron-on to your chipboard charms using Cricut EasyPress and Cricut EasyPress Mat. For time and temp settings, see below for link to Heat Transfer Guide.
- Use hardware to attach charms to wine glasses, following product instructions.