Rated 5 out of
5
by
nicstevens80 from
Easy money saving.
It's nice to not have to buy new blades all the time. Super easy to use.
Date published: 2023-12-14
Rated 5 out of
5
by
Autumn from
A must have for all crafters!!!
Just the neatest gizmo i didnt know I needed til i got one, now everyone needs one! Works really well and gives more life to my rotary blades. Cant say eniugh good things about this one!
Date published: 2023-12-08
Rated 5 out of
5
by
Yarr from
Awesome
[This review was collected as part of a promotion.] I got my mom a rotary cutter, and it had not cross my mind to check for a blade sharpener for the blade. I'm surprised and glad I found this dual rotary blade sharpener to go with her rotary cutter. The instructions are straightforward and easy to follow. Can't say if it further sharpened the blade because her rotary cutter is new and was not in need of sharpening. However, it is easy to use and I appreciate that as she deals with problems in her hands.
Date published: 2023-11-30
Rated 5 out of
5
by
Michelle46 from
Works great!
[This review was collected as part of a promotion.] I got the OmniGraffle dual blade sharpener 45mm and it works great! I used it on my rotary blade that I have for cutting material and it made the blade super sharp with just a couple of turns. It's really easy to put together and use. Definately recommend using a glove when taking the blade off because of how sharp the blade is going to be.
Date published: 2023-11-26
Rated 4 out of
5
by
hybroanglid from
Easy way to extend the life of your rotary blades!
[This review was collected as part of a promotion.] I was rather unsure how to use this rotary blade sharpener when it first arrived, but fortunately, it came with fairly clear and easy to follow instructions. You just unscrew the two middle handle pieces, insert the blade to be sharpened over the screw that sticks out of one, then screw them together again with the blade sandwiched in between them. To sharpen, you just use those handles to turn the blade against the sharpening surfaces. There are two surface grains here. You should start with the very coarse side, then turn the blade over to sharpen against the much finer surface material. It definitely helps to use a little bit of water and keep the blade a little bit damp throughout the sharpening process, and it's a good idea to rinse or wipe off any residual grit before returning it to your cutter.
The blade on my Omnigrid rotary cutter is actually brand new, so it isn't dull at all, but I did go through the motions of sharpening it, and I can see it's a pretty simple process. It takes all of five minutes at most, and it can really extend the life of your blade. I love that because it saves me money! It's also environmentally more responsible to get more use out of something you already own instead of throwing it out and buying a new one. If you have a rotary cutter, you definitely need a way to sharpen the blades for it, and this is a great way to do that!
Date published: 2023-11-06
Rated 5 out of
5
by
Jesse M from
This thing is genius!
[This review was collected as part of a promotion.] Replacing the blades on a rotary cutter has been the only way to do it for years. Why? Because I didn't know this handy little gadget existed! Easy to use, entirely functional. Sharpening 45 mm rotary blades is so easy. Extending the life of your rotary cutter is better on the pocket - more money to spend on your projects! But really, having this in your arsenal is a no brainer. I love it.
Date published: 2023-11-02
Rated 4 out of
5
by
Pyro83 from
Great Product
[This review was collected as part of a promotion.] I honestly never even knew this existed. I have been replacing the entire blade for years and years. The convenience of sharpening the blade myself will not only make crafting a cheaper experience as well as speeding up the process when the blade does become dull.
Date published: 2023-10-30
Rated 5 out of
5
by
Ally from
Life saver!
I had no idea this was even a thing! I make a lot of wreaths and this this has been a life saver of my rotary blades.
Date published: 2023-10-20
Rated 4 out of
5
by
linny from
Rotary blade sharpener
Just what I needed to sharpen my ancient rotary blades -- hoping to get back into sewing & especially quilting when the weather cools. Will try my newly sharpened blades soon.
Date published: 2023-09-05
Rated 4 out of
5
by
MichelleM from
This is going to save me money!
Works well for sharpening in preparation for cottons. For fine fabrics, I will go with a new blade. This device is going to save me some cash on everyday projects!
Date published: 2023-03-30
Rated 1 out of
5
by
Migit from
Does not work!!
This product was a disappointment! I tried several times to do blades, and never could get it to work!
Date published: 2023-01-21
Rated 5 out of
5
by
Kristy from
Best sewing/quilting tool I never knew about... at a discount for curbside pick up, too!!
I was taking advantage of the 20% off in store pick ups, I found online when I scrolled pass this gem! I've spent tons of time in Joann's, so I don't know how I could have missed a rotary cutter sharpener! Of couse I bought it right away and set out to sharpen the 3 blades I have. The instructions were very clear and usage is very easy. All of my blades are like new now! Including the one that had a little flaw in it that caused a spot to not thoroughly cut when used! Blades are expensive so this is definitely going to pay for itself quickly. It's a great tool.
Date published: 2023-01-21
Rated 5 out of
5
by
Razz912 from
Worth it
My blade had a dull spot so i bought this handy little tool. Just a few twists and it is good as new. This is a must have tool for anyone that uses a rotary blade!
Date published: 2023-01-20
Rated 5 out of
5
by
Fireboysgirl from
Worked well for me
Had a spot on my blade that did not cut well after using the sharpener it was resolved.
Hoping to get more life from my blades
Date published: 2023-01-06
Rated 5 out of
5
by
Sharon S from
Good product
Works really well. Easy to use. Price was reasonable. Better than spending the money on blades that won't last.
Date published: 2022-12-22
Rated 5 out of
5
by
JoAnn from
Cutting blades
Works well after you figure out that you must flip the blade to get both sides.
Date published: 2022-12-09
Rated 5 out of
5
by
Em Montgomery from
Good buy. Surprisingly versitile.
Extends the life of the blades tremendously. Used it to sharpen fiskars 45 mm blades.
Date published: 2022-09-30
Rated 5 out of
5
by
Wendy from
Rotary blade sharpener is a good choice
I love this little gadget. It extends the life of your rotary blades. Easy to use and worth the purchase.
Date published: 2022-09-02
Rated 5 out of
5
by
Sandra Blake from
Longer rotary blade life
Perfect for getting more life out of your rotary blades
Date published: 2022-08-26
Rated 1 out of
5
by
Barbara from
The Omnigrid Dual Cutting Blade
I sharpened all my rotary blades with the Omnigrid but when I went to use it it would cut, then skip, then cut, then skip & etc. I then had to use my scissors to cut where the blade didn’t . The product is terrible. I wouldn’t recommend anyone buying it. I thought I could save money by not buying the blades but I was wrong. I will have to buy the blades instead.
Date published: 2022-06-10
Rated 4 out of
5
by
Ksap from
Rotary Blade Sharpener
Product prolongs the life of a sharp rotary blade.
Date published: 2022-04-29
Rated 5 out of
5
by
Patsy from
save some money
This product cuts down on the cost of buying blades. I can sharp the blade a little and get more use out of it.
Date published: 2022-04-29
Rated 4 out of
5
by
mrlavelle from
Not bad
Need to watch the YouTube video to make sure you are doing it right. Works pretty well
Date published: 2022-04-21
Rated 4 out of
5
by
MLKe from
Tricky at first
Works very well. Had a hard time lining everything up the first time, but once I figured it out, it worked perfectly.
Date published: 2022-04-07
Rated 5 out of
5
by
Beth from
It’s not fancy, but works great!
The blade I sharpened works better than it did when new
Date published: 2022-03-17
Rated 5 out of
5
by
12db from
Like the rotary blade sharpener
This keeps my blade shaper for a bit longer. My pervious one is getting worn and I need a replacement. I have used it for years.
Date published: 2022-03-11
Rated 5 out of
5
by
Elsa from
Saving money sharpening my blades
i still have not used it but will let you know when I do
Date published: 2022-01-06
Rated 5 out of
5
by
Katieskabin from
Grear dual Rotary blades
Omnigrid is a great brand no matter what product you buy. I like to use my coupons to purchase, however, this one i bought one, got one free! Great buy!!
Date published: 2021-12-30
Rated 5 out of
5
by
LauraO from
Omni Rotary Blade Sharpener 45 mm
It’s a bit wobbly to learn but seems to have worked!
Date published: 2021-12-23
Rated 5 out of
5
by
DeZinerSue from
Omnigrid Rotary Blade Sharpener
This rotary blade sharpener was so easy to use and worked perfectly. This will save me so much money from buying new blades. I have to tell all my quilting friends!
Date published: 2021-12-17